OVCam Drivers for 2.4 and 2.5 kernels

More thorough installation instructions are available at:
http://alpha.dyndns.org/ov511/install.html

Quick Installation (2.4 kernels):

	make clean
	make
	(log in as root)
	make install

Quick Installation (2.5 kernels):

	make -C /lib/modules/`uname -r`/build -f Makefile SUBDIRS=$PWD modules
	make -C /lib/modules/`uname -r`/build -f Makefile SUBDIRS=$PWD modules_install

  This uses the new 2.5 modular build process.

Loading the modules:

  As of version 2.21, the camera chip code is in a separate module (ovsensor).
  If you have a camera, this must be loaded either before or after loading the
  ov511 or ovfx2 drivers:

	modprobe ovsensor

  or, if you have a video-capture box from Lifeview:

	modprobe saa7111-new

  Finally, load the driver itself. For OV511, OV511+, OV518, and OV518+ cameras:

	modprobe ov511

  or, for the Orange Micro iBot2:

	modprobe ovfx2

Compression support:

 - For OV511/OV511+ cameras: Compression support is built into ov511.o. You
   must load ov511.o with the "compress=1" module parameter to enable it.

 - For OV518/OV518+ cameras: Compression support is built into ov511.o and
   enabled by default.

 - For OVFX2 cameras: Compression is not supported by the camera (USB 2 is fast
   enough to not need it).

Please see ov511.txt for more information.
